IC Device types supported include:
FLASH memories, EPROMs, EEPROMs, Serial EEPROMs, FPGA Configuration Serial PROMs,
NVRAMs, PLDs, CPLDs, EPLDs, Firmware HUBs, Microcontrollers, PICs, Standard Logics.
Suppoprts standard DIP and skinny DIP packages from 8 to 48-pins
on standard equipment
Supports a wide variety of other IC packages with reliable factory-made adapters.
Packages supported includes:
PLCC, CLCC, SOIC, LAP, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, PSOP, TSSOP,
SON, EBGA, FBGA, VFBGA, µBGA, etc.
Free software updates can be downloaded via Internet at any time.
PROGHRAMMING SPEED
Very fast programming speed via USB interface.
Programs and verifies a 64M-bit NOR flash memory device in 11.3 seconds
and a 64Mb EEPROM in 43 seconds.
The auto-start feature allows programming to start automatically
as soon as a chip is inserted into the programming socket.
Programming Speed Examples
IC Device Type
IC Device Manufacturer
IC Device Part #
Program and Verify
64Kb EEPROM
ATMEL
AT28C64B
0.9 SEC
128Kb SERIAL EEPROM
MICROCHIP
24AA128
4.5 SEC
20KB FLASH MCU
ATMEL
AT89C55
7.5 SEC
64Mb SPI EEPROM
SPANSION
S25FL064A
58.6 SEC
PIC MICRO
MICROCHIP
PIC16F876A
10.9 SEC
PIC MICRO
MICROCHIP
PIC18F442
6.2 SEC
HARDWARE FEATURES
The programming unit has 48 universal pin-drivers built-in.
There is no need to add additional or optional pin-drivers
for programming devices of up to 48-pins.
Since each pin-driver is software programmable, proper voltage
levels will be applied to each and every pin, not just the Vcc pins,
allowing true low-voltage programming for low-voltage devices.
Light-weight and portable, good for field applications and
international travel (takes 110V to 240V AC).
EASY-TO-USE S/W FOR IC PROGRAMMING
Programmer-control S/W is Windows XP and Vista compatible.
Pin continuity and reverse insertion checks help to prevent devices
from accidental damage.
Over-current and over-voltage protection ensures safety of the
devices and programmer hardware.
Auto-program command combines device operations like program, verify, security
into a single command at any user-selected sequence.
Project function simplifies operations. Settings such as device selection,
file selection, device configuration, program options can be saved into
project files, thus reducing multiple steps into a single operation.
Automatically recognizes file formats and detects large file offsets.
FLEXIBLE MULTI-MODE OPERATIONS
Convenient PC-controlled mode, via high speed USB 2.0, lends to easy
operation for the R&D and engineering environment.
Stand-alone operation is provided by a built-in 6-key keyboard and a
4-line LCD display.
(Requires optional Compact Flash Card for storing programming algorithms
which are downloaded from PC to programmer. Once the programming algorithms
and data files are stored in the Compact Flash Card, the programmer can
be operated without connection to a PC.)
The programming unit is light-weight and portable, good for
field applications and international travel (takes 100V to 240V AC).
USEFUL FOR HIGH-VOLUME IC PROGRAMMING
Putting multiple units together in stand-alone mode
creates a multi-site concurrent programming environment for volume
production. The advantages, over a traditional
gang programmer, are:
Flexible and expandable: start with one unit and expand by adding more
units when the need arises.
Less down time: in case of a failure of one unit, other units
can continue to operate.
Concurrent programming: each chip begins to be programmed as soon
as it is inserted into a socket.
UNIVERSAL IC CHIP PROGRAMMER:
TECHNICAL SPECIFICATION
DEVICE SUPPORT
Device (IC) Types Supported:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory (NOR), EPLD, Firmware HUB,
Microcontroller, Microchip PIC, etc.
Device Packages Supported on Standard Equipment:
DIP, SDIP.
Software and device algorithms are updated regularly.
Current software can be downloaded free of charge
Updates are available by mail at a nominal charge.
HARDWARE & ELECTRICAL
PC interface: High speed USB 2.0
AC power supply: Input 100V-240V AC, 50/60 HZ.
Output 12VDC, 2 Amp.
Programmer physical size: 8" x 5 1/2" x 2 5/8" high
(203mm x 140mm x 65mm)
Net weight (programming unit, AC power supply, USB cable):
2.0 Lbs.
Gross shipping weight: 5 Lbs.
WARRANTY
2-years. Programmer is warranted to be free of manufacturing
or workmanship defects for two (2) years from the date of purchase.
Warranty covers parts, labor, and free UPS ground shipping from
Advin back to customer. (Free ground shipping applies to 48-states
and Canada only).
INCLUDED ITEMS
Programming unit with 48-pin DIP ZIF socket adapter.
AC power supply.
USB Cable.
S/W CD.
User's Guide.
Registration card and user-feedback form.
Back View
USB cable
AC Power Supply
OPTIONAL ITEMS
Socket adapters for different device packages.
Compact flash card for stand-alone operation.
YOUR SATISFACTION IS GUARANTEED
Improve your productivity and order your own Xeltek SuperPro-5000E Programmer Now List Price $1495
Our Everyday Low Price $1295
You have two sources
of service. Not pleased
with manufacturer's
support? Call us.
Safe - easy exchange.
Not pleased with one manufacturer's
model? Exchange for another one.
Safe - easy exchange.
Not pleased with one manufacturer's
model? Exchange for another one.